How to set up Scisky FC step by step


#61

Sorry, I have no devo tx.
But others here do.
I’m somehow sure your issue is related to tx settings.
If no one chimes in here try to get help in the discord mmw chat.


#62

Both these vids helped me along with the info here to plugin and do a basic set up.

I have not got around to building or flying with the Scisky yet but had my Devo 7e stick movements showing up in Cleanflight.

GL!

Edit: I may have actually still been on Deviation 4 when I done this.

https://youtu.be/TljzFBZR4zE

https://youtu.be/j810zIW9O9U


#63

@Skootetrash74 for starters, can you post a cli dump and the model.ini file you’re using on your devo?


#64

dont have a clue what any of that is. deviation v.5 firmware flashed on the 7e.


#65

In the cleanflight configurator ,connect and go to the cli tab (last one on the left)
Type dump, press enter. Copy and paste the contents here.
The model file is available from your devo when you connect via USB. I don’t remember the directory but you can browse in explorer. The file should be called model1.ini or whichever model file you use.


#66

2016-05-28 @ 18:13:16 – Running - OS: Windows, Chrome: 51.0.2704.63, Configurator: 1.2.2
2016-05-28 @ 18:14:28 – Serial port successfully opened with ID: 18
2016-05-28 @ 18:14:28 – MultiWii API version received - 1.16.0
2016-05-28 @ 18:14:28 – Flight controller info, identifier: CLFL, version: 1.12.1
2016-05-28 @ 18:14:28 – Running firmware released on: Apr 10 2016 19:57:39
2016-05-28 @ 18:14:28 – Board: AFNA, version: 2
2016-05-28 @ 18:14:28 – Unique device ID received - 0x66dff524957847167112944
2016-05-28 @ 18:14:54 – Accelerometer calibration started
2016-05-28 @ 18:14:56 – Accelerometer calibration finished
2016-05-28 @ 18:15:11 – Serial port successfully closed
2016-05-28 @ 18:28:59 – Serial port successfully opened with ID: 34
2016-05-28 @ 18:28:59 – MultiWii API version received - 1.16.0
2016-05-28 @ 18:28:59 – Flight controller info, identifier: CLFL, version: 1.12.1
2016-05-28 @ 18:28:59 – Running firmware released on: Apr 10 2016 19:57:39
2016-05-28 @ 18:28:59 – Board: AFNA, version: 2
2016-05-28 @ 18:28:59 – Unique device ID received - 0x66dff524957847167112944
2016-05-28 @ 18:30:06 – Accelerometer calibration started
2016-05-28 @ 18:30:08 – Accelerometer calibration finished
2016-05-28 @ 18:30:55 – EEPROM saved
2016-05-28 @ 18:30:55 – Device - Rebooting
2016-05-28 @ 18:30:56 – Device - Ready
2016-05-28 @ 18:31:19 – EEPROM saved
2016-05-28 @ 18:31:19 – Device - Rebooting
2016-05-28 @ 18:31:21 – Device - Ready
2016-05-28 @ 18:31:54 – EEPROM saved
2016-05-28 @ 18:32:47 – EEPROM saved
2016-05-28 @ 18:32:47 – Device - Rebooting
2016-05-28 @ 18:32:48 – Device - Ready
2016-05-28 @ 18:32:58 – EEPROM saved
2016-05-28 @ 18:32:58 – Device - Rebooting
2016-05-28 @ 18:33:00 – Device - Ready
2016-05-28 @ 18:33:18 – EEPROM saved
2016-05-28 @ 18:33:18 – Device - Rebooting
2016-05-28 @ 18:33:19 – Device - Ready
2016-05-28 @ 18:33:41 – EEPROM saved
2016-05-28 @ 18:33:41 – Device - Rebooting
2016-05-28 @ 18:33:43 – Device - Ready
2016-05-28 @ 18:34:23 – RC Tuning data refreshed
2016-05-28 @ 18:37:35 – Serial port successfully closed
2016-05-28 @ 18:38:56 – Serial port successfully opened with ID: 35
2016-05-28 @ 18:38:56 – MultiWii API version received - 1.16.0
2016-05-28 @ 18:38:56 – Flight controller info, identifier: CLFL, version: 1.12.1
2016-05-28 @ 18:38:56 – Running firmware released on: Apr 10 2016 19:57:39
2016-05-28 @ 18:38:56 – Board: AFNA, version: 2
2016-05-28 @ 18:38:56 – Unique device ID received - 0x66dff524957847167112944
2016-05-28 @ 18:44:15 – Serial port successfully closed
2016-05-28 @ 18:47:42 – Serial port successfully opened with ID: 36
2016-05-28 @ 18:47:42 – MultiWii API version received - 1.16.0
2016-05-28 @ 18:47:42 – Flight controller info, identifier: CLFL, version: 1.12.1
2016-05-28 @ 18:47:42 – Running firmware released on: Apr 10 2016 19:57:39
2016-05-28 @ 18:47:42 – Board: AFNA, version: 2
2016-05-28 @ 18:47:42 – Unique device ID received - 0x66dff524957847167112944
2016-05-28 @ 18:48:49 – EEPROM saved
2016-05-28 @ 18:48:49 – Device - Rebooting
2016-05-28 @ 18:48:51 – Device - Ready
2016-05-28 @ 18:49:21 – EEPROM saved
2016-05-28 @ 18:49:21 – Device - Rebooting
2016-05-28 @ 18:49:23 – Device - Ready
2016-05-28 @ 18:49:51 – EEPROM saved
2016-05-28 @ 18:49:51 – Device - Rebooting
2016-05-28 @ 18:49:52 – Device - Ready
2016-05-28 @ 18:50:40 – EEPROM saved
2016-05-28 @ 18:50:40 – Device - Rebooting
2016-05-28 @ 18:50:42 – Device - Ready
2016-05-28 @ 18:51:02 – EEPROM saved
2016-05-28 @ 18:51:02 – Device - Rebooting
2016-05-28 @ 18:51:04 – Device - Ready
2016-05-28 @ 18:51:41 – EEPROM saved
2016-05-28 @ 18:51:41 – Device - Rebooting
2016-05-28 @ 18:51:42 – Device - Ready
2016-05-28 @ 18:54:38 – Unrecoverable failure of serial connection, disconnecting…
2016-05-28 @ 18:54:39 – Serial port successfully closed
2016-05-28 @ 19:10:57 – Serial port successfully opened with ID: 37
2016-05-28 @ 19:10:57 – MultiWii API version received - 1.16.0
2016-05-28 @ 19:10:57 – Flight controller info, identifier: CLFL, version: 1.12.1
2016-05-28 @ 19:10:57 – Running firmware released on: Apr 10 2016 19:57:39
2016-05-28 @ 19:10:57 – Board: AFNA, version: 2
2016-05-28 @ 19:10:57 – Unique device ID received - 0x66dff524957847167112944
2016-05-28 @ 19:11:04 – CLI mode detected
Setup
Ports
Configuration
Failsafe
PID Tuning
Receiver
Modes
Adjustments
Servos
GPS
Motors
Race Transponder
LED Strip
Sensors
Tethered Logging
Blackbox
CLI
Note: Leaving CLI tab or pressing Disconnect will automatically send β€œexit” to the board. With the latest firmware this will make the controller restart and unsaved changes will be lost.

Entering CLI Mode, type β€˜exit’ to return, or β€˜help’

dump

version

Cleanflight/NAZE 1.12.1 Apr 10 2016 / 19:57:39 (d0c90cf)

dump master

mixer

mixer QUADX
mmix reset
smix reset

feature

feature -RX_PPM
feature -VBAT
feature -INFLIGHT_ACC_CAL
feature -RX_SERIAL
feature -MOTOR_STOP
feature -SERVO_TILT
feature -SOFTSERIAL
feature -GPS
feature -FAILSAFE
feature -SONAR
feature -TELEMETRY
feature -CURRENT_METER
feature -3D
feature -RX_PARALLEL_PWM
feature -RX_MSP
feature -RSSI_ADC
feature -LED_STRIP
feature -DISPLAY
feature -ONESHOT125
feature -BLACKBOX
feature -CHANNEL_FORWARDING
feature -TRANSPONDER
feature RX_PPM
feature VBAT
feature FAILSAFE

map

map TAER1234

serial

serial 0 1 115200 57600 0 115200
serial 1 0 115200 57600 0 115200

led

led 0 15,15:ES:IA:0
led 1 15,8:E:WF:0
led 2 15,7:E:WF:0
led 3 15,0:NE:IA:0
led 4 8,0:N:F:0
led 5 7,0:N:F:0
led 6 0,0:NW:IA:0
led 7 0,7:W:WF:0
led 8 0,8:W:WF:0
led 9 0,15:SW:IA:0
led 10 7,15:S:WF:0
led 11 8,15:S:WF:0
led 12 7,7:U:WF:0
led 13 8,7:U:WF:0
led 14 7,8:D:WF:0
led 15 8,8:D:WF:0
led 16 8,9::R:3
led 17 9,10::R:3
led 18 10,11::R:3
led 19 10,12::R:3
led 20 9,13::R:3
led 21 8,14::R:3
led 22 7,14::R:3
led 23 6,13::R:3
led 24 5,12::R:3
led 25 5,11::R:3
led 26 6,10::R:3
led 27 7,9::R:3
led 28 0,0:::0
led 29 0,0:::0
led 30 0,0:::0
led 31 0,0:::0

color

color 0 0,0,0
color 1 0,255,255
color 2 0,0,255
color 3 30,0,255
color 4 60,0,255
color 5 90,0,255
color 6 120,0,255
color 7 150,0,255
color 8 180,0,255
color 9 210,0,255
color 10 240,0,255
color 11 270,0,255
color 12 300,0,255
color 13 330,0,255
color 14 0,0,0
color 15 0,0,0

set looptime = 2000
set emf_avoidance = OFF
set i2c_highspeed = ON
set gyro_sync = ON
set gyro_sync_denom = 1
set mid_rc = 1500
set min_check = 1100
set max_check = 1900
set rssi_channel = 0
set rssi_scale = 30
set rssi_ppm_invert = OFF
set rc_smoothing = OFF
set input_filtering_mode = OFF
set min_throttle = 1000
set max_throttle = 2000
set min_command = 1000
set servo_center_pulse = 1500
set 3d_deadband_low = 1406
set 3d_deadband_high = 1514
set 3d_neutral = 1460
set 3d_deadband_throttle = 50
set motor_pwm_rate = 400
set servo_pwm_rate = 50
set retarded_arm = OFF
set disarm_kill_switch = ON
set auto_disarm_delay = 5
set small_angle = 25
set fixedwing_althold_dir = 1
set reboot_character = 82
set gps_provider = NMEA
set gps_sbas_mode = AUTO
set gps_auto_config = ON
set gps_auto_baud = OFF
set serialrx_provider = SPEK1024
set sbus_inversion = ON
set spektrum_sat_bind = 0
set telemetry_switch = OFF
set telemetry_inversion = OFF
set frsky_default_lattitude = 0.000
set frsky_default_longitude = 0.000
set frsky_coordinates_format = 0
set frsky_unit = IMPERIAL
set frsky_vfas_precision = 0
set hott_alarm_sound_interval = 5
set battery_capacity = 0
set vbat_scale = 110
set vbat_max_cell_voltage = 43
set vbat_min_cell_voltage = 33
set vbat_warning_cell_voltage = 35
set current_meter_scale = 400
set current_meter_offset = 0
set multiwii_current_meter_output = OFF
set current_meter_type = ADC
set align_gyro = DEFAULT
set align_acc = DEFAULT
set align_mag = DEFAULT
set align_board_roll = 0
set align_board_pitch = 0
set align_board_yaw = 0
set max_angle_inclination = 500
set gyro_lpf = 188HZ
set gyro_soft_lpf = 60.000
set moron_threshold = 32
set imu_dcm_kp = 2500
set imu_dcm_ki = 0
set yaw_control_direction = 1
set pid_at_min_throttle = ON
set airmode_saturation_limit = 50
set yaw_motor_direction = 1
set yaw_jump_prevention_limit = 200
set tri_unarmed_servo = ON
set servo_lowpass_freq = 400.000
set servo_lowpass_enable = OFF
set failsafe_delay = 10
set failsafe_off_delay = 200
set failsafe_throttle = 1000
set failsafe_kill_switch = OFF
set failsafe_throttle_low_delay = 100
set failsafe_procedure = 0
set rx_min_usec = 885
set rx_max_usec = 2115
set acc_hardware = 0
set baro_hardware = 0
set mag_hardware = 0
set blackbox_rate_num = 1
set blackbox_rate_denom = 1
set blackbox_device = SERIAL
set magzero_x = 0
set magzero_y = 0
set magzero_z = 0

rxfail

rxfail 0 a
rxfail 1 a
rxfail 2 a
rxfail 3 a
rxfail 4 h
rxfail 5 h
rxfail 6 h
rxfail 7 h
rxfail 8 h
rxfail 9 h
rxfail 10 h
rxfail 11 h
rxfail 12 h
rxfail 13 h
rxfail 14 h
rxfail 15 h
rxfail 16 h
rxfail 17 h

dump profile

profile

profile 0

aux

aux 0 0 0 900 900
aux 1 0 0 900 900
aux 2 0 0 900 900
aux 3 0 0 900 900
aux 4 0 0 900 900
aux 5 0 0 900 900
aux 6 0 0 900 900
aux 7 0 0 900 900
aux 8 0 0 900 900
aux 9 0 0 900 900
aux 10 0 0 900 900
aux 11 0 0 900 900
aux 12 0 0 900 900
aux 13 0 0 900 900
aux 14 0 0 900 900
aux 15 0 0 900 900
aux 16 0 0 900 900
aux 17 0 0 900 900
aux 18 0 0 900 900
aux 19 0 0 900 900

adjrange

adjrange 0 0 0 900 900 0 0
adjrange 1 0 0 900 900 0 0
adjrange 2 0 0 900 900 0 0
adjrange 3 0 0 900 900 0 0
adjrange 4 0 0 900 900 0 0
adjrange 5 0 0 900 900 0 0
adjrange 6 0 0 900 900 0 0
adjrange 7 0 0 900 900 0 0
adjrange 8 0 0 900 900 0 0
adjrange 9 0 0 900 900 0 0
adjrange 10 0 0 900 900 0 0
adjrange 11 0 0 900 900 0 0

rxrange

rxrange 0 1000 2000
rxrange 1 1000 2000
rxrange 2 1000 2000
rxrange 3 1000 2000

servo

servo 0 1000 2000 1500 45 45 100 -1
servo 1 1000 2000 1500 45 45 100 -1
servo 2 1000 2000 1500 45 45 100 -1
servo 3 1000 2000 1500 45 45 100 -1
servo 4 1000 2000 1500 45 45 100 -1
servo 5 1000 2000 1500 45 45 100 -1
servo 6 1000 2000 1500 45 45 100 -1
servo 7 1000 2000 1500 45 45 100 -1

set gps_pos_p = 15
set gps_pos_i = 0
set gps_pos_d = 0
set gps_posr_p = 34
set gps_posr_i = 14
set gps_posr_d = 53
set gps_nav_p = 25
set gps_nav_i = 33
set gps_nav_d = 83
set gps_wp_radius = 200
set nav_controls_heading = ON
set nav_speed_min = 100
set nav_speed_max = 300
set nav_slew_rate = 30
set alt_hold_deadband = 40
set alt_hold_fast_change = ON
set deadband = 0
set yaw_deadband = 0
set throttle_correction_value = 0
set throttle_correction_angle = 800
set default_rate_profile = 0
set gimbal_mode = NORMAL
set acc_cut_hz = 15
set accxy_deadband = 40
set accz_deadband = 40
set accz_lpf_cutoff = 5.000
set acc_unarmedcal = ON
set acc_trim_pitch = 0
set acc_trim_roll = 0
set baro_tab_size = 21
set baro_noise_lpf = 0.600
set baro_cf_vel = 0.985
set baro_cf_alt = 0.965
set mag_declination = 0
set pid_delta_method = MEASUREMENT
set pid_controller = MWREWRITE
set p_pitch = 40
set i_pitch = 30
set d_pitch = 23
set p_roll = 40
set i_roll = 30
set d_roll = 23
set p_yaw = 85
set i_yaw = 45
set d_yaw = 0
set p_pitchf = 1.400
set i_pitchf = 0.400
set d_pitchf = 0.030
set p_rollf = 1.400
set i_rollf = 0.400
set d_rollf = 0.030
set p_yawf = 3.500
set i_yawf = 0.400
set d_yawf = 0.010
set level_horizon = 3.000
set level_angle = 5.000
set sensitivity_horizon = 75
set p_alt = 50
set i_alt = 0
set d_alt = 0
set p_level = 20
set i_level = 10
set d_level = 100
set p_vel = 120
set i_vel = 45
set d_vel = 1
set yaw_p_limit = 500
set dterm_cut_hz = 0.000
set gtune_loP_rll = 10
set gtune_loP_ptch = 10
set gtune_loP_yw = 10
set gtune_hiP_rll = 100
set gtune_hiP_ptch = 100
set gtune_hiP_yw = 100
set gtune_pwr = 0
set gtune_settle_time = 450
set gtune_average_cycles = 16

dump rates

rateprofile

rateprofile 0

set rc_rate = 90
set rc_expo = 65
set rc_yaw_expo = 0
set thr_mid = 50
set thr_expo = 0
set roll_rate = 0
set pitch_rate = 0
set yaw_rate = 0
set tpa_rate = 0
set tpa_breakpoint = 1500


#67

http://www.deviationtx.com/downloads-new/category/398-deviation-5-0-0?download=2496:deviation-devo7e-v5-0-0-zip


#68

i hope this is the info that you are wanting. thank you in advance for any help :slight_smile:


#69

The dump looks good.
You didn’t provide the model file. Did you modify any model settings in the devo?
I believe two channels need to be reversed and all channels need to be scaled to Β±147
You also need to set the protocol to dsm2


#70

Try copying and using this model file:
http://community.micro-motor-warehouse.com/t/fc-scisky-fully-integrated-2-5g-cleanflight-fc/35/152?u=littlrussian


#71

i reversed 2 channels, set it to dsm2 protocol. initially the stick movements showed up on cleanflight. then something changed. motors run when i plug a battery up to fc, and it will bind to tx, but thats it. solid red light, flashing green light and no blue light


#72

A bound RX will give you a solid red light regardless any settings of the FC.
Not sure whether you have enabled serial RX on UART2 (if not, do that). Select RX_SERIAL as receiver mode and set the serial receiver provider to SPEKTRUM1024.


#73

I tried that, and cleanflight wouldn’t allow it when I hit save


#74

I tried to Google search how to put initial file on devo 7e… no useful results. I don’t know how to add a model file to the tx. I read the manual on the 7e and nothing mentioned about initial file


#75

.ini files, not initial files… damn auto correct on phone lmao!


#76

Please understand I have never done any of this stuff. This is my first hobby grade quad setup. I have never programed a fc and don’t know anything about it. I got this far by watching youtube videos and messing around with it until I figured it out… I am a total techtard


#77

I also flashed the newest naze from cleanflight on it. When I soldered the jumper wire on it and tried to flash, it didn’t work. It flashed without the jumper wire


#78

If you have the jumper wire on there to short the boot pads - you have to flash with β€œno reboot sequence” checked.


#79

I tried it both ways…


#80

Hi check your motor pwm rate for my opinion it is to low i have mine on 23200 .Does your the motors spin or not when you plug in the battery?
Good Luck :slight_smile:
I flashed mine yesterday and i do it for the 3rd time and had bind problems at least it will work just with the battery with usb it won’t bind but remember never both together